INOV8 offers two sizes of S-Series Waste Oil Burners: S200 and S700 - both capable of burning a wide variety of waste oils in the safest design available. The patented technology allows the burning of used oil regardless of viscosity or flashpoint. The preheater heats the oil to a temperature where all oils reach the same viscosity. The pump circulates this oil around the heating element through small tubes at about four feet per second. This prevents charring of oil that typically occurs in competitor designs. The charred oil resembles hard black pieces that will block in a nozzle and cause shutdowns. This system also allows the oil to be preheated to a higher temperature providing two benefits: 1) the ability to burn the higher flash point oils like synthetic and vegetable oils and 2) to burn all of the hydrocarbon molecules in the oils for complete and clean combustion with no smoke. The patented needle assembly seats into the nozzle during each shutdown keeping the oil from dribbling out and for instant ignition with no puffing or smoking.
Safety has been a critical element in the design of the INOV8 waste oil burners. We use a Fireye industrial rated combustion control suited for the “unpredictable” nature of used oil. It monitors the flame and delivers the oil only when everything is working properly. Competitor burners use a combustion control intended for residential fuel oil, which is very “predictable” by comparison. Another strong feature is the ease of servicing the INOV8 waste oil burner. All components are modular in design such that they can be changed out easily if there is a need for service.
These two standard waste oil burning burners are adjustable with minor changes to allow BTU outputs ranging from 100,000 to 1,000,000. They can be used on approved heating appliances: furnaces, petroleum oil boilers, vegetable oil boilers, or waste water evaporators.
Call for assistance to determine if retrofitting to your heating appliance is feasible, and for current pricing and availability.
