INOV8 INTERNATIONAL, INC - Waste Oil Burning Furnaces

The INOV8 water heater with dual-fuel burning capability is specifically designed to use available waste fryer oil as fuel to generate hot water. If the oil is depleted the system is designed to sense a loss of oil pressure and automatically revert the fuel selection to gas without interruption to the production of hot water. The water heater control will display a notification that the fuel was changed to gas to allow the operator to respond when convenient.

This system was designed to accommodate the characteristics of the fryer oil taking into account the high flash point of the oil, the filtering requirements, to provide for an automatic backup, and the ability to customize controls for hot water requirements. This hot water system includes: a boiler and dual-fuel burner rated at 210,000 BTUs, a control system that includes a PLC (programmable logic control) for custom settings and automatic fuel function, a gas valve train, oil control system, a cleanable in-line filter, an installation and operation instruction manual and spare filters and fuses. Optional items are available to complete the system, including a 50 gallon polyethylene oil storage tank with a built-in heating system, an oil level device that displays a remote light indicating empty and full tank levels, a chimney system that includes a provision for preheating fresh air for combustion, and an oil transfer pump capable of handling hot oil directly from the fryer.

Benefits of a Boiler Used for a Water Heater
Commercial water heaters have a life expectancy in the seven year range, though industry contacts report failings as early as four years. The failing occurs due to the light-weight materials used in the construction of the water heater. By comparison the Triad Boiler used by INOV8 as the boiler for our water heater, is constructed of steel that is 17% to 33% heavier than industry requirements, and is rolled or expanded into place to prevent thermal stressing common from welded boilers. Each boiler has ASME certification as a pressure-fired vessel. That all means that this INOV8 water heater will last at least 20 years – but likely much longer. When used for domestic hot water, boilers are covered by the same installation codes as a water heater; they generally do not require annual boiler inspections and can be installed by your local plumber.

Download Information

This new series of gas-oil burners offers solutions to generators of petroleum based waste oil, new and used fryer oil, low BTU value oil even water-laden coolant oil. This is accomplished by using a gas assist to ignite and fully combust these difficult to burn fluids. The INOV8 Gas—Oil Burner can use as fuel "gas only", "oil only" or the "combination at 50/50". The burner incorporates a PLC control that can sense a loss of oil pressure and automatically revert the fuel to gas for back-up purposes and for complete reliability. Biofuels are well recognized for low carbon emissions—allowing users to do their part in protec??ng the environment.

Uncompromised engineering specifically designed for the challenges of burning waste oils in a safe, clean and reliable manner. This new burner combines the superior quality of an Italian built gas burner with the patented features of the INOV8 design. Similar to the model S200 burner that INOV8 technology is based upon, the new G-series dual-fuel burners provide clean combustion, flexibility of fuels, low operating costs and unmatched safety.

The G-series dual-fuel burners allow the user to switch between fuels and automatically revert back to natural or propane gas should the used oil supply run out. The burners also provide all the safety features INOV8 customers have trusted for years, such as: 90 second prepurge, 10 second trial for ignition, three-second fuel shutoff, seven electronic checks, UV sensor, main flame trial-for-ignition. This burner can be used on furnaces, boilers, hot water heaters and waste water evaporators providing a reliable fuel backup.